Slotted Fixturing Blocks
3 products, prices from €356.60 to €418.60, excl. VAT.
Made by Duamek, delivered in 8–14 business days
Slotted Fixturing Blocks are steel blocks serving as supports or spacers in workholding set-ups. The block is bolted to a machine table or fixture plate with an ISO 4762 socket head cap screw through the lengthwise slot and positioned by sliding along the screw. The slot is open at one end face and closed and round-ended at the other, and is counterbored on top so the screw head sits below the top face. Near the closed end, a threaded hole matching the screw runs through the block, countersunk at both ends.
Three metric sizes: 100 × 60 × 15 mm for M8, 120 × 40 × 20 mm for M12 and 140 × 60 × 30 mm for M16. Slot width 9, 13 and 17 mm; counterbore 15, 20 and 26 mm wide, 8.5, 12.5 and 17 mm deep. C45 carbon steel (1.0503 / AISI 1045), black oxide and oiled; bottom face milled. Mass 0.60, 0.53 and 1.48 kg.
Also known as: slotted fixturing block, fixturing block, workholding block, spacer block, slotted spacer block
3 products
Common to all products in this list: Material Carbon steel C45 (1.0503 / AISI 1045), black oxide
- N7R-D9V3
€356.60each
- Material
- Carbon steel C45 (1.0503 / AISI 1045), black oxide
- PXQ-S14H
€373.00each
- Material
- Carbon steel C45 (1.0503 / AISI 1045), black oxide
- H2R-RF6E
€418.60each
- Material
- Carbon steel C45 (1.0503 / AISI 1045), black oxide
Prices are in euros and exclude VAT; import VAT is collected by the carrier on delivery. Shipping is shown as a separate line in the cart.