Hold-Down & Positioning Clamps for CMM: product photo

Hold-Down & Positioning Clamps for CMM

4 products, prices from €160.20 to €1,082.20, excl. VAT.

Made by Duamek, delivered in 8–14 business days

Hold-Down & Positioning Clamps for CMM hold the part during measurement. Each screws into our threaded-grid fixture plates for CMM with the M6×1 stud underneath. On the hold-down clamp, the arm slides along and turns around the post; tightening the knurled thumb screw presses the post into the arm's V-ended slot and locks the arm. On the positioning clamp, two pins slide in the arm's slot and their NBR O-rings touch the part; collars keep the knurled nuts captive.

Hold-down clamps: reach 38.1, 63.5 or 88.9 mm; post 76.2, 76.2 and 152.4 mm; thumb screw M3.5, M5 and M6 respectively. Arm in EN AW-7075 T651 aluminium, natural anodised; post and one-piece turned screw in uncoated 303 stainless steel. Positioning clamp: arm 93.09 × 13.72 × 12.7 mm, EN AW-6061 T651 aluminium, natural anodised; post, pins, nuts and collars in 303 stainless steel; opening 11.2–57.05 mm between the O-rings' outer faces. The arm's countersunk M6×20 A2-70 pivot screw is included.

Also known as: CMM clamp, CMM hold-down clamp, CMM positioning clamp, inspection fixture clamp, CMM fixture hold-down

4 products

Common to all products in this list: Thread size M6; Application Part measurement and inspection

  • KBF-S3RT

    €160.20each

    Clamp type
    Hold-down
    Clamping action
    Hold-down
    Height
    76.2 mm
    Reach
    38.1 mm
    Material
    Aluminium 7075, anodised; stainless steel 303
  • QJG-VJSC

    €166.20each

    Clamp type
    Hold-down
    Clamping action
    Hold-down
    Height
    76.2 mm
    Reach
    63.5 mm
    Material
    Aluminium 7075, anodised; stainless steel 303
  • BG9-P94Z

    €215.40each

    Clamp type
    Hold-down
    Clamping action
    Hold-down
    Height
    152.4 mm
    Reach
    88.9 mm
    Material
    Aluminium 7075, anodised; stainless steel 303
  • 5B6-7750

    €1,082.20pair

    Clamp type
    Positioning
    Clamping action
    Squeeze
    Height
    63 mm
    Reach
    19.05 mm
    Material
    Aluminium 6061, anodised; stainless steel 303

Prices are in euros and exclude VAT; import VAT is collected by the carrier on delivery. Shipping is shown as a separate line in the cart.