Clamp-Style Twin Shaft Supports: product photo

Clamp-Style Twin Shaft Supports

4 products, prices from €91.10 to €161.90, excl. VAT.

Made by Duamek, delivered in 8–14 business days

Clamp-style twin shaft supports carry the ends of two parallel linear shafts in one block, at equal height and fixed spacing, for two-shaft slides. The rectangular body is one piece; both bores are machined to H7 before slotting. There is no separate clamp screw: a horizontal slot runs from each bore to the nearer end, crossed at right angles by the bolt in the counterbored mounting hole on that side. Tightening each bolt pulls the jaw above its slot down onto that shaft, so both shafts are slid in axially first.

The 4 parts are metric: shaft diameter 10, 12, 20 or 25 mm, shaft spacing 34–88 mm, centre height 14–30 mm (same for both bores, ±0.015 mm). Length 70–160 mm, width 12–25 mm, height 25–56 mm. Mounting holes are 5.5–13.5 mm at 55–132 mm centres, counterbored from above for M5 to M12 socket head cap screws (not included). Bodies are anodised EN AW-6061-T6 aluminium.

Also known as: twin shaft support, double shaft support, dual shaft support block, two-shaft support, linear shaft support

4 products

Common to all products in this list: Shape Rectangular; Material Aluminium 6061, anodised; Number of mounting holes 2; Construction One-piece; Manufacturing Machined; Support mounting Base mount

  • 2A7-JHA6

    €91.10each

    Clamping screw thread
    M5
    Overall length
    70 mm
    Centre height
    14 mm
    Mounting hole diameter
    5.5 mm
    Overall height
    25 mm
  • PJD-N7AV

    €98.70each

    Clamping screw thread
    M6
    Overall length
    85 mm
    Centre height
    18 mm
    Mounting hole diameter
    6.6 mm
    Overall height
    32 mm
  • 57S-3SBV

    €128.10each

    Clamping screw thread
    M10
    Overall length
    130 mm
    Centre height
    25 mm
    Mounting hole diameter
    11 mm
    Overall height
    46 mm
  • QQZ-4PWZ

    €161.90each

    Clamping screw thread
    M12
    Overall length
    160 mm
    Centre height
    30 mm
    Mounting hole diameter
    13.5 mm
    Overall height
    56 mm

Prices are in euros and exclude VAT; import VAT is collected by the carrier on delivery. Shipping is shown as a separate line in the cart.